Pre-Operation Checklist: An Important Daily Step for OSHA and ANSI Forklift Compliance

Don’t wait until a safety audit to start thinking about OSHA and ANSI compliance.

Download the Daily Forklift Pre-Operation Inspection Checklist and make forklift safety part of your company’s daily rhythm.

First and foremost, always refer to your forklift’s Operator Manual (which should always be located on the back of the operator seat). The Operator Manual includes a chapter about Daily Pre-Operation Checks, which will include all of the items that an operator must inspect each shift, before operating the equipment.

Depending on what type of equipment you have, your list may vary from one piece of equipment to the next. That’s why you should always refer to the Operator Manual for each individual piece of equipment. For example, an electric counterbalance forklift will have a different pre-operation inspection checklist than an internal-combustion counterbalance lift truck.

Below is a general checklist to follow before each shift to ensure that your forklift is in safe working condition, but always refer back to your Operator Manual for the final call on what components need to be inspected for your specific piece of equipment. Report any defects immediately and do not operate an unsafe unit.


🔎 Visual Inspection

  • Check tires for wear or damage

  • Inspect forks for cracks, bends, or other damage

  • Look for visible hydraulic leaks

  • Ensure that overhead guard is secure and undamaged

  • Inspect mast chains for wear or slack

  • Check fluid levels (oil, coolant, hydraulic)


⚙️ Operational Inspection

  • Test brakes and parking brake

  • Ensure horn, lights, and backup alarm are functioning

  • Check seatbelt for damage and functionality

  • Test steering for smooth operation

  • Operate mast controls (lift, lower, tilt)

  • Check all gauges and warning lights on dashboard


🔋 Battery or Fuel System

  • Check battery electrolyte levels (if applicable)

  • Ensure battery connections are tight and clean

  • Inspect fuel system for leaks (gas/propane)

  • Secure propane tank and check hose condition


🚨 Safety Equipment

  • Ensure fire extinguisher is present and charged

  • Confirm operator manual is onboard

  • Check for safety decals and capacity plate (aka “data tag” or “data plate”)

Download our Pre-Operation Checklist here.  

REQUEST INFORMATION